Thinkware T700 - Settings Management; Memory Card Settings; Camera and Recording Settings

32
7. Settings
You can set the product features according to your needs and preferences using the mobile viewer or the
PC viewer. The following procedures are based on the mobile viewer.
The product will stop recording while configuring settings on the mobile viewer.
Select Disable to turn off the feature.
7.1 Managing the memory card
From the mobile viewer, tap Dash Cam settings
>
Memory Card Settings to manage the memory card settings.
Options Description
Memory Partition
Select the desired memory partition type from Continuous Priority/Incident
Priority/Parking Priority/Manual Priority/Driving Recording Only.
Formatting Memory Card
In Formatting Memory Card, tap Format
>
OK to proceed with formatting the
memory card.
Overwrite Videos
Select the desired modes to allow video overwriting.
7.2 Setting the Camera
From the mobile viewer, tap Dash Cam settings
>
Camera Settings to adjust the camera settings.
Options Description
Brightness-front
Select the desired brightness of the front camera from Dark/Mid/Bright.
7.3 Setting recording features
From the mobile viewer, tap Dash Cam settings
>
Record Settings to manage the recording features settings.
Options Description
Continuous Mode Incident
Recording Sensitivity
Select the desired sensitivity from Disabled/Lowest/Low/Mid/High.
Super Night Vision
Select the desired mode to apply Super Night Vision from Disabled/Continuous
Mode/Parking Mode/Continuous+Parking.
Parking Mode
Select the desired mode to apply parking mode from Disabled/Motion Detection/
Time Lapse/Energy Saving.