8.2.4
Fill A/B
Use this function to add fill bars.
1. In NORMAL mode, press the [FILL A] button to insert one fill bar. ‘FILL A’ is
flashing in the display. When the bar has ended the piano returns to NORMAL
mode.
2. In NORMAL mode, press the [FILL B] button to insert one fill bar. ‘FILL B’ is
flashing in the display. When the bar has ended the piano changes to the VAR‐
IATION mode.
3. In VARIATION mode, press the [FILL A] button to insert one fill bar. ‘FILL A’ is
flashing in the display. When the bar has ended the piano changes to the
NORMAL mode.
4. In VARIATION mode, press the [FILL B] button to insert one fill bar. ‘FILL B’ is
flashing in the display. When the bar has ended the piano returns to VARIA‐
TION mode.
– If you keep the button [FILL A] or [FILL B] pressed while a style is playing,
the selected fill pattern is played until you release the button.
– Press the [FILL A] button after style playing has ended. Then the change
to the NORMAL section takes place and ‘FILL A’ lights up in the display.
– Press the [FILL B] button after style playing has ended. Then the change
to the VARIATION section takes place and ‘FILL B’ lights up in the dis‐
play.
8.2.5
Ending a style
1. Instant ending
You can exit the accompaniment function any time by pressing the
[START/STOP] button.
2. Ending
Press the [INTRO/ENDING] button to finish the performance with an ending.
The style stops after the ending.
3. SYNC
Press the [SYNC] button to stop the style. The synchronised start mode is acti‐
vated.
Functions
DP-30
23
To Next Page
Loading...
Need help?
General
