n Chord names
Chord names tell you just about everything you need to know about a chord.
The chord name tells you the root note, whether it is major, minor or diminished
chord, whether it requires a major or flatted seventh and what alterations or ten‐
sion are used – everything at a glance.
n Some chord types
8.2.9
Metronome
1. Press the [METRO] button to activate the metronome. You can select the beat
in the Function menu.
2. Press the [METRO] button again to turn the metronome off.
3. If the style mode is deactivated the beat follows the selection in the functions
menu after turning on the metronome. If style mode is activated the beat set‐
ting follows the current style.
4. The metronome can be activated together with the style. If the style plays at
first, the metronome will be enabled with the next bar. On the other hand, the
metronome responds at once to the first beat of the style.
8.3
Function menu
Press the [FUNCTION] button to call the function menu. The first function shown after
starting the menu is always ‘Transpos’. Press the button [FUNCTION] repeatedly to
select the desired option. Then change the parameter using the jog dial or the but‐
tons [ +] or [–]:
Functions
DP-30
27
To Next Page
Loading...
Need help?
General
