8.3.2
Fine tuning
Use this function to fine tune the entire keyboard in cent increments.
The display shows the current setting. Use the jog dial or the buttons [ +] or [–]
to change the tuning within a range of –50 to +50 cents. Each keystroke
changes the value by 1 cent. Press the buttons [ +] and [–] simultaneously to
reset the tuning to the preset value.
8.3.3
Beat
This function sets the beat value in a range of 0 to 9.
The display shows the current setting. Use the jog wheel or the buttons [ +] or
[–] to change the beat.
8.3.4
Touch sensitivity
This function lets you adjust the touch response of the keyboard in four steps.
Parameter Description
‘OFF’ Touch sensitivity is off, very recommendable when playing the
organ voice.
‘001’ Soft
In this setting, the volume is higher than usual even when playing
with a soft touch.
‘002’ Normal
This setting corresponds to the usual touch response of a key‐
board.
‘003’ Hard
In this setting, the volume is lower than usual even when playing
with a hard touch.
1. The display shows the current setting. Use the jog wheel or the buttons [ +] or
[–] to change the touch sensitivity.
2. When selecting ‘OFF’, the ‘TOUCH’ indicator turns off and the function is deac‐
tivated.
Functions
DP-30
29
To Next Page
Loading...
Need help?
General
