8
Functions
8.1
Voices and effects
8.1.1
Selecting voices
The digital piano offers 210 voices in total.
1. 16 voices can be called via the direct selection button. Each direct selection
button hosts 2 voices. Press once to activate the voice labelled above the
button. Press twice to activate the voice labelled below the button.
On switching on, ‘VOICE R1’ lights up in the display and the name of voice 001
is displayed.
2. To select other voices press the direct selection keys, the [+] / [–] buttons or
turn the jog dial.
If you activate the VOICE mode for the first time by pressing the [VOICE]
button the display shows ‘VOICE R1’ (right hand voice). Press the [VOICE]
button repeatedly to sequentially activate the following additional modes
=> ‘VOICE R2’ (second right hand voice in Dual Mode) => ‘VOICE L’ (left
hand voice) => ‘VOICE R1’ (right hand voice).
8.1.2
Dual mode
In Dual mode, you can play two voices simultaneously. When Dual mode is off,
‘VOICE R1’ is displayed. When Dual mode is on, ‘VOICE R2’ is displayed.
1. Press the buttons [+] or [–] or turn the jog dial to select the desired voice. The
default preset voice in Dual mode is No. ‘050 Strings2’.
2. Press the [DUAL] button again to quit the Dual mode. ‘VOICE R2’ is disabled
and you only hear the ‘VOICE R1’ voice.
When the keyboard is split, the Dual mode affects only keys to the right of
the keyboard split point. The area to the left of the split point is then meant
for chord playing.
Functions
DP-30
19
To Next Page
Loading...
Need help?
General
