8.5.3
Storing & loading parameters
1. Keep the [STORE] button pressed and press one of the buttons [M1] to [M4]
simultaneously. Then the data will be stored in the respective memory slot (M1
to M4). Please note that any previously stored data will be overwritten.
2. Press one of the buttons [M1] to [M4]. The data is then loaded from the corre‐
sponding memory slot replacing the current settings. The respective memory
slot number appears in the display.
When you turn off the digital piano, the stored data is retained.
8.5.4
Deleting memory data
1. If you keep the buttons [STORE] and [M1] pressed while powering the digital
piano up, the current memory data will be saved as the default values.
2. If you keep the buttons [+] and [–] pressed while powering the digital piano
up, the factory default values are loaded and stored songs are deleted.
8.6
One Touch Setting
One Touch Setting (O.T.S.) is a convenient feature that allows you to immediately
reconfigure all the settings with just one single keystroke. These are rhythm-based
combinations of instrument voices. With this function, four types of parameters can
be loaded (M1 to M4).
The standard parameter saved in the O.T.S. are:
n Right hand voice R1
n Second right hand voice in dual mode R2
n Left hand voice L
n R1 volume
n R2 volume
Functions
DP-30
33
To Next Page
Loading...
Need help?
General
