thomann DP-30 - Setup Guide; Assembly Instructions

4 Setup guide
You need a Phillips screwdriver (not supplied) to assemble the stand. Open the pack‐
aging and please make sure prior to assembly that you have the full scope of delivery
available as listed below.
1. Digital piano housing with music stand
8. Screws 4 ´ 15 (5 pcs.)
2. Right side panel 9. Cable holder
3. Left side panel
10. Screw 6 ´ 12 (2 pcs.)
4. Rear wall 11. Mains cable
5. Pedal box 12. Pedal cable
6. Handscrew (4 pcs.) 13. Plastic cap (4 pcs.)
7. Screws 6 ´ 30 (4 pcs.)
Setup guide
DP-30
9