thomann DP-50 User Manual

5. Place the piano case on the base frame. Then fix the housing using the four
handscrews and two screws 6 ´ 18.
6. Connect the cable from the pedal box to the ‘PEDAL’ socket on the rear panel
of the unit. Stick one of the cable holder on the inside of the side panel and
attach the pedal cable to it.
1. Make sure that the piano is switched off before connecting the device to the
power grid or disconnecting it.
Mains connection
Setup guide
DP-50
11

thomann DP-50 Specifications

General

Brand	thomann
Model	DP-50
Category	Musical Instrument
Language	English