thomann T.racks DSP 26 - Security Utilities - Show Parameter

This menu is used to define if the device parameters are displayed or hidden.
In the [UTILITY] menu, select the ‘Security Utilities’ option and confirm with [ENTER].
Select the ‘Show Parameter’ menu item and confirm with [ENTER]. The display shows the cur‐
rent setting.
Switch between the available options with [PM2] or [PM3] and confirm by pressing [ENTER] to
apply the new setting.
Parameter display
n ‘Parameter will be shown’ – This selection displays all device parameters.
n ‘Parameter will not be shown’ – This selection hides all device parameters.
Pressing [ESC] exits the menu without applying changes.
"Security Utilities" - "Show
Parameter"
Operating
DSP 26
31