thomann T.racks DSP 26 - Output Channel Preset Management

To Next Page

To Previous Page

This menu can be used to load a set of default settings (presets) for the output channel. Press

the button of the output channel [1] - [6] you want to edit in order to activate the edit mode

for the relevant channel. Press [ENTER] to make the relevant settings in the ‘Load Channel

Preset’ menu.

Use [NAV/PAR1] to change the required preset. Confirm the new setting with [ENTER]. Pressing

[ESC] exits the menu item.

Program places 1 - 15 are populated with presets for the speakers from the the box pro Achat

series. The remaining program places 16 - 32 can be populated freely and called up in this

menu.

This menu can be used to save a set of default settings (presets) for the output channel. Press

the button of the output channel [1] - [6] you want to edit in order to activate the edit mode

for the relevant channel. Press [ENTER] to make the relevant settings in the ‘Save Channel

Preset’ menu.

Use [NAV/PAR1] to change the required preset. Pressing [ENTER] allows you to change the

name of the presets to be saved. Use [PM2] to select the position and [PM3] to change the sign.

Confirm with [ENTER]. Pressing [ESC] exits the menu item.

Program places 1 - 15 are populated with presets for the speakers from the the box pro Achat

series. The remaining program places 16 - 32 can be populated freely and saved in this menu.

"Load Channel Preset"

"Save Channel Preset"

Operating

DSP 26