This menu is used to activate or deactivate the password protection of the device.
In the [UTILITY] menu, select the ‘Security Utilities’ option and confirm with [ENTER].
Select the ‘Enable Password’ menu item and confirm with [ENTER]. The display shows the cur‐
rent setting.
Switch between the available options with [PM2] or [PM3] and confirm by pressing [ENTER] to
apply the new setting.
Password protection
n ‘Password: Enable’ - With this selection, the device parameters can only be accessed after
entering a valid password.
n ‘Password: Disable’ - With this selection, all device parameters can be edited without
entering a password.
Pressing [ESC] exits the menu without applying changes.
"Security Utilities" - "Enable
Password"
Operating
digital speaker management system
34
To Next Page
Loading...