This menu can be used to activate a dynamic filter. Press [A] or [B] to activate the edit mode for
channel A or B and to open the ‘Input A/B’ menu. Press [ENTER] to make the relevant settings in
the ‘DLF’ menu.
Use [NAV/PAR1] to change the level to be edited; use [PM2] or [PM3] to change the displayed
parameters ‘Bypass’, ‘% Boost’, ‘Freq’ and ‘Q’ (Quality). Confirm to save the new setting with
[ENTER]. Pressing [ESC] exits the menu item.
Pressing [ESC] takes you back to the first level. Pressing [ESC] again exits the menu item.
"DLF"
Operating
digital speaker management system
40
To Next Page
Loading...