Chapter 5
Expert Configuration
E-DOC-CTC-20050429-0104 v1.0
174
5.7.2 VPN Client
The VPN Client page The VPN client in the SpeedTouch™ can replace a software VPN client installed on a
computer. You can use it for example to connect from your home to your employer’s
corporate network for tele-working. The VPN Client page allows you to configure a
VPN client that functions in Initiator mode. This means that the VPN client takes the
initiative to set up a secure connection to a remote VPN server.
Configuration
procedure
Perform the following steps to configure your VPN client:
1 Select VPN > VPN Client.
2 Fill out the various parameter fields in the VPN Client web page.
3 Select the IKE Authentication method. Either Preshared Key or Certificate
Authentication can be selected.
4 Select the Start Mechanism. Either manual dial-in or Automatic Start (Always
On) can be selected.
5 Click Add to confirm the data and Save All to save the configuration.
To Next Page
Loading...
