Chapter 1
Your SpeedTouch™
E-DOC-CTC-20050429-0104 v1.0
13
1.3.2 Access via CLI
Command Line
Interface (CLI)
You can access the Command Line Interface (CLI) via:
The embedded Expert pages. For more information, see “5 Expert
Configuration” on page 101.
A Telnet session
This requires that TCP/IP connectivity exists between the host from which the
Telnet session is opened and the SpeedTouch™. Your SpeedTouch™ and the
connected PC must have an IP address in the same subnet.
The serial ‘Console’ interface
Quote site commands (over FTP)
For more information, see “ Quote site command” on page 17.
For information on CLI commands, see the SpeedTouch™ CLI Reference Guide.
To Next Page
Loading...
