Chapter 8
Troubleshooting
E-DOC-CTC-20050429-0104 v1.0
198
Adding IGD Discovery
and Control
Your MS Windows XP system is able to discover and control Internet Gateway
Devices (IGD), like the SpeedTouch™ on your local network. Therefore it is
recommended to add the IGD Discovery and Control client to your system.
Proceed as follows:
1 On the Windows task bar, click Start.
2 Select (Settings >) Control Panel > Add or Remove Programs.
3 In the Add or Remove Programs window, click Add/Remove Windows
Components.
4 The Windows Components Wizard appears:
Select Networking Services in the Components list and click Details.
5 In the Networking Services window, Select Internet Gateway Device
Discovery and Control Client and click OK.
6 Click Next to start the installation and follow the instructions in the Windows
Components Wizard.
7 At the end of the procedure the wizard prompts you that the installation was
successful. Click Finish to quit.
To Next Page
Loading...
