Chapter 5
Routed PPPoE
E-DOC-CTC-20051017-0167 v1.0
47
Expected results To check whether you have configured your connection correctly, take a look at the
interface list. Normally you should be able to follow the path you created.
The interface list does not include the ATM phonebook entry. To check its state, go
to the ATM phonebook list.
=>interface list
Name Type State Use UL Interfaces
ethif1 physical connected 1 ethport1
ethif2 physical connected 1 ethport2
ethif3 physical connected 1 ethport3
ethif4 physical connected 1 ethport4
RELAY eth connected 0
bridge eth connected 1 lan1
OBC bridge connected 1 bridge
ethport1 bridge connected 1 bridge
ethport2 bridge connected 1 bridge
ethport3 bridge connected 1 bridge
ethport4 bridge connected 1 bridge
lan1 ip connected 0
RtPPPoE_atm atm connected 1 RtPPPoE_eth
RtPPPoE_eth eth connected 1 RtPPPoE_ppp
RtPPPoE_ppp ppp connected 1 RtPPPoE
RtPPPoE ip connected 0
The items in Italic are the interfaces created in this chapter.
=>atm phonebook list
Name Use Address
RtPPPoE_ph 1 8.35
To Next Page
Loading...
