Chapter 6
PPPoE Relay
E-DOC-CTC-20051017-0167 v1.0
56
Expected results To check whether you have configured your connection correctly, take a look at the
interface list. Normally you should be able to follow the path you have created.
The interface list does not include the ATM phone book entry. To check its state, go
to the ATM phone book list.
=>interface list
Name Type State Use UL Interfaces
ethif1 physical connected 1 ethport1
ethif2 physical connected 1 ethport2
ethif3 physical connected 1 ethport3
ethif4 physical connected 1 ethport4
RELAY eth connected 1 Relay_ppp
bridge eth connected 2 RELAY, lan1
OBC bridge connected 1 bridge
ethport1 bridge connected 1 bridge
Relay_atm atm connected 1 Relay_eth
Relay_eth eth connected 1 RELAY
ethport2 bridge connected 1 bridge
ethport3 bridge connected 1 bridge
ethport4 bridge connected 1 bridge
Relay_ppp ppp connected 1 Relay
Relay ip connected 0
lan1 ip connected 0
The items in Italic are the interfaces created in this chapter.
=>atm phonebook list
Name Use Address
Relay_ph 1 8.35
To Next Page
Loading...
