TSC 7320 Transfer Switch Controller
PM180 REV 0 23/02/10 Thomson Power Systems
10
3. DESCRIPTION
The TSC 7320 controller is an all in one unit and does not require any communication cables to operate.
The controller has 13 buttons on the front of the controller that can be used to change what the controller
is displaying, changing the settings, and control the mechanism. See the figure below for more
information.
3.1. FRONT PANEL LEDS
The front panel of the controller has 12 LEDs that display the position of the ATS, source
availability, current controller mode, and some inputs / outputs.
The front panel LEDs will stay illumined while the given status is true except for the Alarm
LED, which will flash if there is an alarm that is present. See SECTION 4.5 for more
information on alarms and how to clear them.
To Next Page
Loading...
