THOMSON TSC 7320 - Events Log Page; Schedule Page; Plc Instrumentation Page

TSC 7320 Transfer Switch Controller
PM180 REV 0 23/02/10 Thomson Power Systems
21
3.6.4. EVENTS LOG PAGE
The events log page shows time/date stamped information as to when events have
occurred. The controller stores up to 250 events before the information is cleared
automatically.
3.6.5. SCHEDULE PAGE
The schedule page shows information about the different exercise tests, when they will
run, and for how long. There are two different banks of schedules, and eight individual
schedules each (sixteen total). Use the up and down buttons to cycle between all the
schedules. By default, the schedules are blank. For more information on how to change
the schedule, see SECTION 5.4.1.
Note: the schedules only run when the controller is in auto mode.
3.6.6. PLC INSTRUMENTATION PAGE
The PLC Instruments page shows several different transfer switch settings, and their
respective values. To change these values, please refer to SECTION 5.1.1.