TSC 7320 Transfer Switch Controller
PM180 REV 0 23/02/10 Thomson Power Systems
1
1. INTRODUCTION
1.1. PRODUCT REVISION HISTORY
The following information provides an historical summary of changes made to this product since
the original release.
Controller Firmware Version
R0, 23/02/10 Original Release
Operating & Service Manual Version
Rev 0 23/02/10 Original release
Related Product Instruction Manuals
TSC 7320 Modbus
TM
Communication, PM174
TS 870 TSC 7320 Installation, Operating, & Service Manual, PM175
TS 870 TSC 7320 Quick Start Guide, PM173
TS 970 TSC 7320 Quick Start Guide, PM176, PM177
TS 880 TSC 7320 Installation, Operating, & Service Manual, PM178
Contact Thomson Power Systems to obtain these instruction manuals. A soft-copy of the most
current versions of these manuals are available at www.thomsonps.com.
1.2. GENERAL DESCRIPTION
The TSC 7320 controller utilizes a powerful ARM microprocessor, which provides high accuracy
for all voltage sensing and timing functions. The TSC 7320 is factory configured to control all the
operational functions and display features of the automatic transfer switch. All features of the
TSC 7320 are fully programmable from the front panel graphical screen display and are security
PIN protected.