TSC 7320 Transfer Switch Controller
PM180 REV 0 23/02/10 Thomson Power Systems
2
2. INSTALLATION
CAUTION
This equipment contains static sensitive parts. Please observe the following
anti-static precautions at all times when handling this equipment. Failure to
observe these precautions may cause equipment failure and/or damage.
The following precautions must be observed:
Discharge body static charge before handling the equipment (maintain exposed body contact
with a properly grounded surface while handling the equipment, a grounding wrist strap
can/should also be utilized)
Do not touch any components on the printed circuit board with your hands or any other
conductive equipment
Do not place the equipment on or near materials such as Styrofoam, plastic and vinyl. Place
the equipment on properly grounded surfaces and only use an anti-static bag for transporting
the equipment
To Next Page
Loading...
