TSC 7320 Transfer Switch Controller
PM180 REV 0 23/02/10 Thomson Power Systems
23
4. OPERATING INSTRUCTIONS
4.1. DISPLAY SCREEN NAVIGATION
The TSC 7320 controller has pre-programmed display pages which are selected manually using the
buttons on the front of the controller, by pushing the left and right navigation buttons.
The display pages are organized into the following order and can be continuously cycled through:
Status – Engine – Generator – Mains – Alarms – Event Log –
Communications – Schedule – PLC Instruments – About
The display pages above can be continuously cycled through left or right:
Each of the headers listed above contain subpages with more information relating to the chosen
header, like voltage, frequency, and current readings.
To Next Page
Loading...
