TSC 7320 Transfer Switch Controller
PM180 REV 0 23/02/10 Thomson Power Systems
19
3.6. DISPLAY PAGE DESCRIPTIONS
The TSC 7320 controller monitors the ATS and displays various information which is visible on
the front Display or front panel LEDs. Navigating to different screens is controlled by a four
navigation buttons, and a center checkmark button. The display has pre-programmed display
pages which are selected manually, and are organized into the following main menu pages in
software:
Status – Engine – Generator – Mains – Alarms – Event Log –
Communications – Schedule – PLC Instruments – About
The display pages above can be continuously cycled through left or right:
Each of the headers listed above contain subpages with more information relating to the chosen
header, like voltage, frequency, and current readings.
To Next Page
Loading...
