Rev: 2.2, 31-Jan-2022 © 2022 Thorlabs Page 24
DC4100 6 Appendix
6.3.1 Set User Current Limit
Command: DC4100_setLimitCurrent
Parameter: LED channel Current limit in ampere
Response: None
Description: Sets the current limit for a specified channel. This limit may not exceed the
LEDs limit specified in the LED head.
6.3.2 Get User Current Limit
Command: DC4100_getLimitCurrent
Parameter: LED channel
Response: Current limit in ampere
Description: Returns the current limit for specified LED channel.
6.3.3 Set Maximum Current Limit
Command: DC4100_setMaxLimit
Parameter: LED channel Maximum current limit in ampere
Response: None
Description: Sets the LEDs maximum current limit in ampere. This limit takes affect until the
next restart of the system.
6.3.4 Get Maximum Current Limit
Command: DC4100_getMaxLimit
Parameter: LED channel
Response: Maximum current limit in ampere
Description: Gets the LEDs maximum current limit in ampere. This value is specific for each
LED channel.
6.3.5 Set Operation Mode
Command: DC4100_setOperationMode
Parameter: Operation mode
Response: None
Description: Sets the operation mode.
6.3.6 Get Operation Mode
Command: DC4100_getOperationMode
Parameter: None
Response: Operation mode
Description: Gets the actual operation mode.