EasyManuals Logo

THORLABS DCU22 Series User Manual

THORLABS DCU22 Series
530 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #306 background imageLoading...
Page #306 background image
© 2013 Thorlabs GmbH304
DCx Cameras
hCam
Camera handle
IS_GET_ENABLE_AUTO_SHUTTER
Returns the current auto exposure shutter setting.
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_SENSOR_SHUTTER
Enables/disables the sensor's internal auto exposure
shutter function
*1
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_SENSOR_SHUTTER
Returns the sensor's current auto exposure shutter
setting
*1
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_WHITEBALANCE
Enables/disables the auto white balance function.
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_WHITEBALANCE
Returns the current auto white balance setting.
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_SENSOR_WHITEBALANCE
Enables/disables the sensor's internal auto white balance
function
*1
Control parameters
pval1: white balance mode (see is_GetAutoInfo()
):
WB_MODE_DISABLE
WB_MODE_AUTO
WB_MODE_ALL_PULLIN
WB_MODE_INCANDESCENT_LAMP
WB_MODE_FLUORESCENT_DL
WB_MODE_OUTDOOR_CLEAR_SKY
WB_MODE_OUTDOOR_CLOUDY
IS_GET_ENABLE_AUTO_SENSOR_WHITEBALANCE
Returns the sensor's current auto white balance setting
*1
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_FRAMERATE
Enables/disables the auto frame rate function.
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_FRAMERATE
Returns the current auto frame rate setting.
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_SENSOR_FRAMERATE
Enables/disables the sensor's internal auto frame rate
function
*1
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_SENSOR_FRAMERATE
Returns the sensor's current auto frame rate setting
*1
Control parameters
pval1: returns the current setting
Adjusting auto gain control/auto exposure shutter
IS_SET_AUTO_REFERENCE
Sets the setpoint for auto gain control/auto exposure
shutter.
Control parameters
pval1: defines the setpoint (average brightness of the
227

Table of Contents

Other manuals for THORLABS DCU22 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the THORLABS DCU22 Series and is the answer not in the manual?

THORLABS DCU22 Series Specifications

General IconGeneral
BrandTHORLABS
ModelDCU22 Series
CategorySecurity Camera
LanguageEnglish

Related product manuals