EasyManuals Logo

THORLABS DCU22 Series User Manual

THORLABS DCU22 Series
530 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #309 background imageLoading...
Page #309 background image
© 2013 Thorlabs GmbH
4 Programming (SDK)
307
hCam
Camera handle
Control parameters
pval1: defines the red level offset (-50...50)
pval2: defines the blue level offset (-50...50)
IS_GET_AUTO_WB_OFFSET
Returns the offset values for the red and blue channels.
Control parameters
pval1: returns the red level offset (-50...50)
pval2: returns the blue level offset (-50...50)
IS_SET_AUTO_WB_GAIN_RANGE
Sets the color gain limits for auto white balance.
Control parameters
pval1: sets the lowest gain value
pval2: sets the highest gain value
IS_GET_AUTO_WB_GAIN_RANGE
Returns the color gain limits for auto white balance.
Control parameters
pval1: returns the minimum permitted gain value
pval2: returns the maximum permitted gain value
IS_SET_AUTO_WB_ONCE
Sets automatic disabling of auto white balance
*2
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_AUTO_WB_ONCE
Returns the automatic disable status
*2
Control parameters
pval1: returns the current setting
Speed and hysteresis
IS_SET_AUTO_WB_SPEED
Sets the speed for auto white balance.
Control parameters
pval1: defines the control speed (0...100)
IS_GET_AUTO_WB_SPEED
Returns the speed for auto white balance.
Control parameters
pval1: returns the current setting
IS_SET_AUTO_WB_HYSTERESIS
Sets the hysteresis value for auto white balance.
Control parameters
pval1: defines the hysteresis value (default: 2)
IS_GET_AUTO_WB_HYSTERESIS
Returns the hysteresis value for auto white balance.
Control parameters
pval1: returns the current setting
IS_GET_AUTO_WB_HYSTERESIS_RANGE
Returns the permissible range for the hysteresis value.
Control parameters
pval1: returns the minimum permitted value
pval2: returns the maximum permitted value
IS_SET_AUTO_WB_SKIPFRAMES
Sets the number of frames to be skipped during
automatic control.
Control parameters
pval1: defines the number (default: 4)
IS_GET_AUTO_WB_SKIPFRAMES
Returns the number of frames to be skipped during
automatic control.
Control parameters
pval1: returns the current setting
IS_GET_AUTO_WB_SKIPFRAMES_RANGE
Returns the permissible range for the number of frames
to be skipped.
Control parameters

Table of Contents

Other manuals for THORLABS DCU22 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the THORLABS DCU22 Series and is the answer not in the manual?

THORLABS DCU22 Series Specifications

General IconGeneral
BrandTHORLABS
ModelDCU22 Series
CategorySecurity Camera
LanguageEnglish

Related product manuals