THORLABS K-Cube Piezo Controller User Manual

20 HA0365T Rev D Jan 2017
Chapter 3
Follow the tutorial described in Chapter 5 for further guidance on basic operation.
Note
The 'APT Config' utility can be used to set up simulated hardware
configurations and place the APT Server into simulator mode. In this way
it is possible to create any number and type of simulated (virtual)
hardware units in order to emulate a set of real hardware. This is a
particularly useful feature, designed as an aid to application program
development and testing. Any number of 'virtual' control units are
combined to build a model of the real system, which can then be used to
test the application software offline.
If using real hardware, ensure that Simulator Mode is disabled. If using a
simulated setup, enable Simulator Mode and set up a ‘Simulated
Configuration’ - see Section 5.9. See also the APTConfig helpfile and the
tutorial videos for detailed instructions.

THORLABS K-Cube Piezo Controller Specifications

General

Brand	THORLABS
Model	K-Cube Piezo Controller
Category	Controller
Language	English