OPERATING MANUAL NBS SAFETY
ThyssenKrupp Aufzugswerke GmbH
1.2 Safety instructions
Notes regarding the operating manual
A requirement for safe handling and non-disruptive operation of this
assembly is knowledge of the fundamental safety regulations.
This operating manual contains the most important information that is
required to operate the assembly safely.
The operating manual, in particular the safety instructions, is to be complied
with by all persons that work on this assembly.
Furthermore, the rules and regulations covering accident prevention that
apply to the installation site must be complied with.
Obligations of the operator and/or of the installation company
The operator or installation firm undertakes only to allow persons to work on
the product who are familiar with the regulations regarding work safety and
accident prevention and have been instructed in handling the product.
They must also have read the chapter on safety and the warnings in this
operating manual.
Note: check at regular intervals that the personnel work with a heightened
awareness with regard to safety.
Obligations on the part of personnel
Persons assigned to work on subassemblies undertake before starting work
to
die comply with the regulations regarding work safety and accident
prevention.
They must also have read the chapter on safety and the warnings in this
operating manual.
Training of personnel
Only trained and instructed qualified personnel may work on the assembly.
The responsibility of the personnel must be clearly defined for all tasks
involving commissioning, operation, servicing and repair.
Organisational measures
The required personal safety equipment must be provided by the operator or
installation company, as the case may be. All existing safety devices are to
be tested regularly in accordance with the maintenance schedule.
To Next Page
Loading...
