Thytronic NC020 - Page 68

SETTING AND COMMISSIONING
68
NC020 - Manual - 05 - 2022
SET
NC020_set.ai
PROCEED SET MENU’
BASE
Inp value 100
Inp unit A
INnp value 100
INnp unit A
Reading Relative
FROM READ MENU’
PROCEED PROFILE A MENU’
K1 Logic
De-energized
K1 mode
No-latched
K1 Trip I>>
K1 tTR 200 ms
K2 Logic
De-energized
K2 mode
No-latched
K2 Trip I>>
K2 tTR 200 ms
K3 Logic
De-energized
K3 mode
No-latched
K3 Trip I>>
K3 tTR 200 ms
K4 Logic
De-energized
K4 mode
No-latched
K4 Trip I>>
K4 tTR 200 ms
RELAYS
I> Element
50/51 RMS
I> Setpoint
I> Definite
I> Inverse
tCLP> 0.50 s
ICLP>
On-Changing
tI>RES 0.00 s
I>def 0.100 In
ICLP>def 0.200 In
tI>def 0.20 s
I<<def 0.100 In
tI<<def 0.20 s
I>Curve DEFINITE
I>inv 0.100 In
ICLP>inv 0.200 In
tI>inv 0.20 s
I<< Element
37
I<< Setpoint
I<< Definite
I<<def logic OR
50/51 Fundam.
I>> Element
I>> Setpont
I>> Definite
I>> Inverse
tCLP>> 0.50 s
ICLP>>
On-Changing
tI>>RES 0.00 s
I>>def 0.100 In
ICLP>>def 0.200 In
tI>>def 0.20 s
I>>Curve DEFINITE
I>>inv 0.100 In
ICLP>inv 0.200 In
tI>>inv 0.20 s
I>>> Element
I>>> Setpont
I>>> Definite
tCLP>>> 0.50 s
ICLP>>>
On-Changing
tI>>>RES 0.00 s
I>>>def 10.0 In
ICLP>>>def 2.00 In
tI>>>def 0.20 s
50N/51N
IE> Element
I>> Setpont
I>> Definite
tIECLP> 0.50 s
IECLP>
On-Changing
tIE>RES 0.00 s
IE>def 0.100 In
IECLP>def 0.200 In
tIE>def 0.20 s
IE>> Element
I>>> Setpont
I>>> Definite
tIECLP>> 0.50 s
IECLP>>>
On-Changing
tIE>>RES 0.00 s
IE>>def 10.0 In
IECLP>>def 2.00 In
tIE>>def 0.20 s