Need help?Do you have a question about the Thytronic NV10P and is the answer not in the manual?
Document scope, limitations, and disclaimer of liability for product use.
Manual validity for NV10P devices with specific firmware release.
Product compliance with CEE directives for EMC and low voltage.
Contact information for technical assistance.
Crucial safety warnings and precautions for installation and handling.
Advisory on handling potentially hazardous voltages after insulation tests.
Overview of the NV10P relay's typical applications and features.
Key hardware and operating features of the NV10P relay.
Information on device identification labels and test labels.
Environmental conditions for device operation and required provisions.
Explanation of text formats, symbols, and notes used in the manual.
Definitions of technical terms and abbreviations used in the manual.
Details on input circuits for inductive VTs and direct connections.
Details on input circuits for electronic sensors.
General technical specifications including product standards, mechanical, insulation, and EMC data.
Details on auxiliary power supply, voltage, residual voltage, and binary inputs.
Specifications for output relays, including contact types and ratings.
Details on the Man-Machine Interface, including display, LEDs, and keyboard.
Information on local and remote communication ports and protocols.
Detailed parameters and specifications for all protective functions.
Functions for system control and monitoring.
Specifications for electrical measurements and accuracy.
Overview of the relay's internal hardware components and architecture.
Details of the relay's software architecture, base, RTOS, and tasks.
Description of input/output signals and data processing.
Detailed parameters and specifications for all protective functions.
Control and monitoring functions including logical blocks and communication.
Table showing usage of measured values for protection, control, and monitoring functions.
Description of the two available binary inputs and their configuration options.
Details on six output relays, their operating modes, and parameters.
Description of available front panel LEDs and their functions.
Details on RS232, RS485, and Ethernet communication ports.
Lower level diagnostic output and information.
Triggering conditions for fault recording.
Recording of events triggered by protection, controls, or binary inputs.
Recording of fault data in COMTRADE format upon programmable trigger.
Standard for data exchange of transient data.
Packaging details for protection and storage.
Options for mounting the protection relays.
Guidelines for making electrical connections and terminal specifications.
Details on RJ45 and FX Ethernet ports and connection requirements.
Instructions for RS485 communication circuit connections and termination.
Connecting Pro-N relays with external auxiliary modules via Thybus port.
Description of available front panel LEDs and their functions.
Checks to perform before energizing the electric board.
Overview of the ThySetter software for configuration and data management.
Operations using the front panel buttons and display for settings and readings.
Procedure for modifying setting parameters via MMI.
Performing operational tests on selected output relays.
Reading and modifying RS485 protocol and Ethernet parameters.
Issuing commands for circuit breaker opening and closing.
Options for enabling or disabling setting changes via keyboard, with password protection.
Hierarchical structure of the relay's menu system.
Diagram illustrating input/output connections and signals.
Overview of the relay's communication interfaces (RS232, Ethernet, RS485).
Overview of the protective functions available in the relay.
Typical connection diagrams for voltage inputs.
Mechanical dimensions of the NV10P relay for various mounting types.
Mechanical dimensions and specifications for the V-Sensor.
Mechanical dimensions and specifications for the ThySensor.
Comprehensive table of parameters, units, and setting ranges for binary inputs.
History of firmware releases, documentation, and communication updates.
Declaration of product conformity to EC directives and applied standards.
To Next Page
General
