Thytronic NV10P User Manual

36
36
NV10P - Manual - 01 - 2015
CHARACTERISTICS
Open CB/Close CB
The external acquisition of remote commands allows to drive CB remotely.
Remote trip
The input activation drives an expressly programmed output relay..
74TV ext
The external acquisition of 74TV allows to block or to change the operating mode of protective el-
ements where the residual voltage is employed; the information is available for residual voltage
protective elements (59N protections) that may operate inadvertently when an event cause a loss of
one or more voltages.
f<-f> Control
While the second threshold of each frequency protection is always active, the fi rst threshold is
activated / deactivated, respectively, in the absence / presence of the signal integrity of the com-
munication network (from digital input set with inverted logic function and Consent f <f-> or by com-
munication interface with IEC 61850 protocol).
UE>>, 27V1, 59V2, U<
When the programmed input is activated, a block of the concerning element is set.
CB-com.ai
OPEN
command
CLOSE
command
+UAUX
+UAUX
-UAUX
IN-
IN+
Open CB
IN-
IN+
Binary input IN1
T0
IN1 t
ON
T0
n.o.
n.c.
IN1 tON
Logic
Close CB
IN1 tOF F
IN1 t
OFF
Binary input IN2
T0
IN2 t
ON
T0
n.o.
n.c.
IN2 tON
Logic
IN2 tOF F
IN2 t
OFF
Binary input allocation for CB remote driving
TRIPPING MATRIX (LED+RELAYS)
-UAUX
-UAUX
52a
52
O
I
52b
CB-com.ai
OPEN
command
CLOSE
command
+UAUX
+UAUX
-UAUX
IN-
IN+
Open CB
IN-
IN+
Binary input IN1
T0
IN1 t
ON
T0
n.o.
n.c.
IN1 tON
Logic
Close CB
IN1 tOF F
IN1 t
OFF
Binary input IN2
T0
IN2 t
ON
T0
n.o.
n.c.
IN2 tON
Logic
IN2 tOF F
IN2 t
OFF
Binary input allocation for CB remote driving
TRIPPING MATRIX (LED+RELAYS)
-UAUX
-UAUX
52a
52
O
I
52b
Remote-trip.ai
Remote trip
+UAUX
-UAUX
Remote trip
Binary input IN1, IN2
T0
IN1 t
ON
T0
n.o.
n.c.
IN1 tON
Logic
IN1 tOF F
IN1 t
OFF
TRIPPING MATRIX (LED+RELAYS)
Binary input allocation for remote trip
Remote-trip.ai
Remote trip
+UAUX
-UAUX
Remote trip
Binary input IN1, IN2
T0
IN1 t
ON
T0
n.o.
n.c.
IN1 tON
Logic
IN1 tOF F
IN1 t
OFF
TRIPPING MATRIX (LED+RELAYS)
Binary input allocation for remote trip
Consenso 81O-81U.ai
Restrictive threshold enabling from binary input
Consenso f<-f>
T0
INx t
ON
0
n.o.
n.c.
INx tON
Logic
INx tOF F
INx t
OFF
f>&DIGIN
f<&DIGIN
Binary input INx
&
&
t
f>def
0T
t
f>def
f ≥ f>
def
f >
def
t
f<def
0T
t
f<def
f < f<
def
f <
def
Consenso 81O-81U.ai
Restrictive threshold enabling from binary input
Consenso f<-f>
T0
INx t
ON
0
n.o.
n.c.
INx tON
Logic
INx tOF F
INx t
OFF
f>&DIGIN
f<&DIGIN
Binary input INx
&
&
t
f>def
0T
t
f>def
f ≥ f>
def
f >
def
t
f<def
0T
t
f<def
f < f<
def
f <
def
Block of element:
UE>> or
27V1 or
59V2 or
U<
+UAUX
-UAUX
UE>> or 27V1 or 59V2 or U<
Binary input INx
T0
INx t
ON
T0
n.o.
n.c.
INx tON
Logic
INx tOF F
INx t
OFF
TRIPPING MATRIX (LED+RELAYS)
UE>> or 27V1 or 59V2 or U< logic block
Block of element:
UE>> or
27V1 or
59V2 or
U<
+UAUX
-UAUX
UE>> or 27V1 or 59V2 or U<
Binary input INx
T0
INx t
ON
T0
n.o.
n.c.
INx tON
Logic
INx tOF F
INx t
OFF
TRIPPING MATRIX (LED+RELAYS)
UE>> or 27V1 or 59V2 or U< logic block

Thytronic NV10P Specifications

General

Brand	Thytronic
Model	NV10P
Category	Relays
Language	English