2GX/AERO X Owner’s Manual
OM_2GX/AERO X_0413RevA
x
CHAPTER 11: CASTERS, FORKS AND CASTER PIN LOCKS 11-1
CASTERS AND BEARING FORKS 11-1
Replacing Casters 11-1
Replacing Bearing Forks 11-1
CASTERS AND BEARING FORKS (Hemi Height) 11-2
Replacing Casters 11-2
Replacing Bearing Forks 11-2
ADJUSTING THE FRONT SEAT HEIGHT 11-3
CASTER PIN LOCKS
11-3
ADJUSTABLE ANGLE FORK 11-3
ADJUSTABLE ANGLE FORK (Heavy Duty) 11-4
ADJUSTABLE CASTER POSITION 11-5
FORK EXTENSIONS 11-6
FORK EXTENSIONS (Heavy Duty) 11-6
FLOATING CASTERS 11-7
FROG LEGS® 11-7
Replacing the Elastomer Shock 11-7
Replacing Frog Legs® 11-8
CHAPTER 12: REAR WHEELS 12-1
REAR WHEEL WITH QUICK-RELEASE AXLE 12-1
Removing 12-1
Replacing 12-1
REAR WHEEL WITH QUAD QUICK-RELEASE AXLE 12-1
Removing 12-1
Replacing 12-1
HANDRIMS 12-2
PNEUMATIC TIRES AND TUBES 12-2
SOLID TIRES 12-2
REAR WHEEL SPACERS 12-2
Adjusting the Rear Wheel Spacing 12-2
CHAPTER 13: ANTI-TIPS 13-1
ANTI-TIPS 13-1
Adjusting 13-1
Mounting the Anti-Tip Receiver 13-1
USER-FRIENDLY ANTI-TIPS 13-2
Engaging 13-2
Disengaging 13-2
Adjusting 13-3
Removing 13-3
Mounting 13-3
CHAPTER 14: TRANSPORTATION OPTIONS 14-1
TRANSPORTATION OPTIONS 14-1
GENERAL WARNINGS 14-2
USE OEM SEATING AND RESTRAINT SYSTEMS 14-3
USE APPROPRIATE TIE-DOWN SYSTEMS AND USE THEM PROPERLY 14-3
USE PROPER EQUIPMENT/USE ONLY AS INSTRUCTED 14-3
AVOID USING IMPROPER EQUIPMENT/ SECURE OTHER EQUIPMENT 14-4
INTRODUCTION 14-4
STATEMENT OF COMPLIANCE/ SPECIFICATIONS 14-5
POSITIONING THE WHEELCHAIR IN THE VEHICLE 14-6
To Next Page
Loading...
