9.4 Ceiling switches
37. Front work light (page 26) 40. Wiper + windshield washer
(page26)
38. Rear work light (page 26)
41. Warning signal device (page 26)
39. Revolving light/signal light (page 26)
9.5 Explanation of controls and switches
1. Clock showing the number of revolutions of the diesel motor and hour timer. The hour
timer shows how many hours the machine has been used. The hour timer activates if the
ignition key is in the B position (see 23. Start switch). This means it is in operation even if
the motor has not been started yet.
2. The diesel tank level meter shows the diesel level in the tank.
3. Clock that shows the temperature of the water in the radiator.
4. Start switch.
A: OFF The position in which the key is inserted or
removed from the start switch.
If the key is in this position,
the diesel motor will turn off.
B: Preheating/ON The key is turned to this position
in order to preheat the ignition heads.
The motor starts.
To Next Page
Loading...
