20 WINDSHIELD WASHER FLUID MAINTAINENCE
The filling nozzle for windshield washer fluid is located on the front of the
machine.
21 WHEEL AND TIRE MAINTAINENCE
CAUTION
Never drive the machine if the rims or wheels are loosened.
- If the nuts are loose, tighten them to their respective target torque.
- Inspect and tighten all the nuts.
The wheel nuts are tightened to 100 Nm.
The tire pressure is set to the required level at the factory. It does, however, drop after time.
Therefore, you must carry out regular inspections and ensure sufficient air pressure in the
tires.
Brand
Insufficient-correct-
too high
CAUTION
Tyre mounting must be carried out by a qualified person with the right
equipment. Driving with poorly mounted tires may cause tragic accidents.
The tyre load capacity depends on the pressure and driving speed. If you want to lower the
tyre pressure for driving on a lawn, then you must decrease your driving speed on the road in
To Next Page
Loading...