order to prevent tyre damage. If you want to significantly reduce the tyre pressure, turn to
Timan A/S. Timan will provide relevant information concerning the maximum speed with
which you may drive with the specified tyre pressure and machine and tool loads.
In special situations when the tyre springs inappropriately match the weight of the machine,
driving forward on the road may be problematic. If such a situation occurs, you may carry out
the below specified adjustments in order to remove any undesirable movements: change the
weight of the machine with equipment (removing/adding), change the tyre pressure (increase
or decrease) or drive at a different speed.
Recommended tyre pressure:
Tyre Recommended pressure Max. Pressure
20x10.00-10 NHS 1.8 bar front 2.2 bar
2.0 bar rear
22 ADDITIONAL EQUIPMENT
You may mount this additional equipment to VPM 3400:
Thermostat-controlled air conditioning
Ball joint with a fork at the rear
LED light in the roof
Motor heater, a cab heater may be mounted in conjunction with the motor heater.
Lighting number at the rear.
New equipment for Timan VPM 3400 is still being developed. Therefore contact Timan or
your local dealer in case you have any questions or wishes.
Example of the table tag lighting in the back.
To Next Page
Loading...
