12.6 Attaching tools to the motor cover
When attaching equipment to the rear end of the machine, it is important for the equipment to
be properly seated in a place where it is possible to lock/secure the spring latches.
Proper mounting The spring latches can be locked/secured
Slidser med låsepaler for
fastholdelse af udstyret i bag
12.7 Safety measures when driving with a centrifugal spreader
When driving with a centrifugal spreader attached at the rear, a winter protective device must
be attached in front of the radiator in order to prevent salt from getting sucked into the
radiator.
IMPORTANT:
In days when the device is used with salty water, it is necessary to clean the device and the
machine with hot water (60C) that same day in order to prevent corrosion.
To Next Page
Loading...