24 DAILY INSPECTION
For safety reasons and in order to maintain the functionality of the machine, it is necessary to
carry out an inspection every day before starting the machine.
No. Inspect see page
1 Tyres, tyre pressure, wear and damage 41
Machine inspection 2 Oil and water leakage 36
3 motor oil level 34
4 Coolant level 36
5 Nuts and bolts toque -
6 Radiator cleanness 36
7 Lubrication (see lubrication plan) 43
8 Grilles and air filter 37
9 Serpentine fan belt tension 39
10 Hydraulic oil level 40
Once the driver is sitting 1 Loose objects in the cab -
on the seat inside 2 Gas pedal -
3 Parking brake -
4 Steering wheel -
After starting the start switch 1 Light functions -
2 Lights and signals -
After starting the motor 1 Exhaust gas colour 29
2 Safety device 4
3 Checking for unusual noise and vibration -
To Next Page
Loading...
