Time Scylon - Raising the Seat; Translink Seat Post

Assembly instructions
1
Translink tube
Raising the seat height (SH)
2
:
- Determine the desired seat height as precisely as
possible (the seat height is the distance between
the crank axle and the seat recess) by lifting it
on your old bike or using your specialist dealer's
ergometer.
Note this dimension
2
carefully:
(in our example opposite SH: 758 mm)
Scylon 05.jpg
Position the seat / seat post assembly on the
Scylon frame:
- The seat post must be lowered into position
3
- The operation must be performed without the
presence of the seat clamp.
- Insert the seat post into the frame without rotating it.
Scylon 09.jpg
5.2 Raising the seat
5.2.1 Translink seat post
The TIME Scylon frame comes with a special Translink seat post designed to t perfectly into the frame prole.
This seat post can never be replaced by another model of similar geometry!
This operation is irreversible. It must be done with great care following the method described. We
advise you to have it done by a professional!
NIM_Scylon-01
8
EN