Getting started
12
ļ
A language selection menu is displayed after connecting for the first time. Use
the control buttons (up/down) to select a language and confirm with the OK
button. Use ESC to then exit the menu.
MWI switch
The MWI switch is used to switch between the different Message Waiting Indicators
of a telecommunication system (see also Page 27, "Message waiting indicator").
The switch must be in the SR position when the phone is being used on a public
line.
SR: MWI is enabled with a special ring tone
HV: MWI is enabled with line voltages greater than 70V
PR1: MWI is enabled via the line polarity
PR2: As PR1 but with reversed polarity
To Next Page
Loading...
