TIPTEL 1020 - Dialling with a direct dial button

Direct dial buttons
23
…
Use the numeric keypad to enter the
name (see also Page 18, "Text en-
t
ry via the numeric keypad").
It is best to enter something here so that
t
he entry can be identified later on.
Press OK to confirm your input.
The cursor stops flashing and the entry is
accepted.
Press ESC to exit the input box.
The display again shows the top-level
menu.
 To clear a direct dial button, simply store it without entering a telephone num-
ber.
Dialling with a direct dial button
Press the direct dial button re-
quired.
The loudspeaker is enabled and the con-
nection is established. The loudspeaker
can be used for the conversation.
or
Pick up the receiver first.
Then press the direct dial button re-
quired.
The connection is established and you
use the receiver for the conversation.