Toa RM-300X - Indicator State at the Time of Failure Output Receipt

2-6
Chapter 2 INDICATOR STATUS OF REMOTE MICROPHONES
1.7.IndicatorStateattheTimeofLampTest
When the lamp test function has been assigned to the Function key, the 2 indicators to the left of the key
indicate the running status of the lamp test.
Pressing the Lamp test key causes all indicators on the primary Remote Microphone to light, and the built-in
buzzer to sound.
Notes
• For instructions on setting the failure detection function, see the separate Setting Software Instructions,
"BASIC SETTINGS."
• For instructions on assigning functions to function keys, see the separate Setting Software Instructions,
"EVENT SETTINGS."
Lamp Test Indicator
Function key (Lamp test key)
The meanings of the 2 indicators next to the Function key are as follows:
Indicator Status Meaning
Lamp Test Indicator Unlit
When the function key is not pressed
Lights yellow
and green
Lamp test has been executed by pressing the function key.