EasyManuals Logo

Tomahawk TW-9010 User Manual

Tomahawk TW-9010
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
TOMAHAWK TW-9010
1 “CHIRP” and flash – function enabled
2 “CHIRPS” and flashes – function disabled
7. Switch ignition OFF.
NOTE:
If the daily auto start function is enabled, the engine will start up immediately after ignition is switched
OFF. Use your remote control trinket to stop the engine.
27. Emergency Arming/Disarming
1. For emergency arming:
A) Switch ignition ON (engine must not be started)
B) Press button “Override” 8 times
C) Switch ignition OFF
Parking lights will flash 1 time and siren will sound 1 “CHIRP” to confirm the function
enabling. 20 sec later the system will enable security mode.
NOTE:
If 20 sec after emergency arming any of security zones is triggered, the system will alert you with 4
parking light flashes and 4 siren “CHIRPS” providing you 20 sec to disarm the car. If disarming does not take
place, the system will enable alarm mode.
2. For emergency disarming:
A) Switch ignition ON (engine must not be started)
B) Press button “Override” 4 times
C) Switch ignition OFF
Parking lights will flash 2 times and siren will sound 2 “CHIRPS” to confirm the function
enabling.
NOTE:
Remote control trinkets remain functioning after emergency arming/disarming
.
14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tomahawk TW-9010 and is the answer not in the manual?

Tomahawk TW-9010 Specifications

General IconGeneral
BrandTomahawk
ModelTW-9010
CategoryCar Alarm
LanguageEnglish