Tomahawk TW-9010 - Connection of Central Lock; Setting Shock Sensor

TOMAHAWK TW-9010
16. Orange and violet wire – hand brake wire.
It is connected to “-“ hand-brake switch (for manual transmission) or to stop lights (for
automatic transmission) (see diagrams 8,9) depending on car bundling.
17. Blue and black wire – “-“ input for door sensor.
18. Orange and grey wire - “-“ input for hood sensor.
4 PIN shock sensor socket
Socket for shock sensor.
2 PIN “Override” button socket
Socket for button “Override”.
2 PIN LED indicator socket
Socket for LED indicator.
5 PIN combined antenna socket
Socket for combined antenna.
4. Selection of Automatic or Manual Transmission
Selection of automatic or manual transmission in TOMAHAWK TW-9010 is done using jumper
1 (see wiring diagram).
Jumper closed – automatic transmission
Jumper open – manual transmission
27