EasyManuals Logo

Tomahawk TW-9010 User Manual

Tomahawk TW-9010
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
TOMAHAWK TW-9010
28. Remote Start-up Preparation for Cars with Manual Transmission
To ensure capability of remote start-up for cars with manual transmission, the gear lever should
be in neutral position.
Before stopping car engine, perform the following procedures:
1. Enable car hand-brake (engine should be started)
2. Press button , LCD will display icon , and a melody will play.
Perform step 3 and 4 within 30 sec
3. Remove key from ignition lock (engine should keep on running)
4. Open the door, get out the car and close the door
If all the steps are performed correctly, the system will automatically stop the engine, if not
capability of remote start-up will be disabled.
29. Programming Auxiliary Trinkets
TOMAHAWK TW-9010 provides for recording up to 4 remote control trinkets in its memory.
To record, perform the following:
1. Switch ignition ON (engine should not be started)
2. Press and hold button “Override”
3. Wait for 4 “CHIRPS” to confirm entry in the trinket programming mode
4. Release button “Override”
5. Press and hold buttons and before you hear siren “CHIRPS”, confirming
memorization of a new trinket (1 “CHIRP” for first trinket, 2 “CHIRPS” for second trinket, 3
“CHIRPS” for third trinket and 4 “CHIRPS” for fourth trinket)
15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tomahawk TW-9010 and is the answer not in the manual?

Tomahawk TW-9010 Specifications

General IconGeneral
BrandTomahawk
ModelTW-9010
CategoryCar Alarm
LanguageEnglish