Need help?Do you have a question about the Tomahawk TW-9010 and is the answer not in the manual?
General| Alarm Type | Two-way |
|---|---|
| Operating Frequency | 433.92 MHz |
| LCD Remote Display | Yes |
| Engine Immobilizer | Yes |
| Shock Sensor | Yes |
| Door Trigger | Yes |
| Hood Trigger | Yes |
| Trunk Trigger | Yes |
| Remote Start | Yes |
| Keyless Entry | Yes |
| Panic Mode | Yes |
| Valet Mode | Yes |
| Battery Backup | Yes |
| Power Voltage | 12V |
| Compatibility | Universal |
| Maximum Range in Control Mode | 1200 m |
| Maximum Range in Notification Mode | 2000 m |
| Remote Control Range | Up to 1200 m |
| Operating Voltage | 12V |
| Type | Car security system |
Overview of the key features and capabilities of the car alarm system.
Description of the remote control units used to operate the car alarm system.
Detailed explanation of the icons and indicators displayed on the LCD screen of the remote.
Procedure for arming the car alarm system with audible and visual confirmations.
How to arm the system silently, with notifications sent only to the trinket-pager.
Explanation of automatic arming and re-arming functions of the car alarm.
Details on the immobilizer mode, its activation, and how to exit it.
Procedure for disarming the car alarm system, including confirmations.
Functionality for operating doors while the car engine is running.
Description of the two-step door opening or auxiliary channel functions.
Information on the turbo timer function for vehicles with turbo engines.
Instructions for starting the car engine remotely using the trinket.
Procedure to stop the car engine when it was started remotely.
How to use the system to warm up the engine to a set temperature.
Details on scheduling automatic engine start-ups at set intervals.
Function to check the current status of the car alarm system remotely.
Procedure for remotely opening the car's boot or trunk.
Description of the second auxiliary channel and its operation.
How to use the car search function to locate the vehicle.
Instructions for disabling the shock sensor remotely.
Explanation of different alarm modes and triggers.
How to activate the panic mode for immediate attention or security.
Procedure for activating the anti-hijack mode to protect against vehicle theft.
Details on how to activate and use the Valet mode for service.
Function to alert the driver via the trinket-pager.
Using the override button for specific functions without a remote.
Procedures for emergency arming and disarming the alarm system.
Specific preparation steps for remote start-up on manual transmission vehicles.
Instructions for programming additional remote control trinkets.
Understanding the LED indicator signals for system status.
Guide for replacing the battery in the trinket-pager.
How to enter the system's programming mode for configuration.
Detailed steps for programming various functions via the trinket-pager.
A reference table for programmable functions and their settings.
Detailed explanations of each programmable function within the system.
Fundamental principles and precautions for installing the car alarm system.
Guidelines for selecting optimal locations for the alarm's main components.
Detailed information on connecting the various wires of the alarm system.
How to configure the system for automatic or manual transmission vehicles.
Instructions for wiring the central locking system to the alarm.
Procedure for installing and adjusting the sensitivity of the shock sensor.
Specifications for the maximum allowable current for various system circuits.
Information on the time intervals for specific system functions and outputs.
To Next Page