TOMAHAWK TW-9010
5. Yellow and red wire – 2nd auxiliary channel wire (-300mA).
6. Grey and black wire – input for tachometer wire or oil pressure sensor.
Connect to tachometer signal wire or oil pressure sensor wire (programmable).
7. Blue and red wire – “+” input for door sensor.
8. Orange and white wire - “-” input for boot sensor.
9. Violet wire - “Anti-hijack” function switch ON wire.
“Anti-hijack” function is switched ON when “-“ appears on this wire.
10. Green and black wire – parking lights power supply wire.
It is connected via 7.5A fuse.
11. Green and yellow wire – parking lights power supply wire.
It is connected via 7.5A fuse.
12. Black and white wire – programmable auxiliary blocking (normally closed/normally open).
300mA (programmable).
13. Grey wire – siren output
(1.5A)
14. Yellow and blue wire – 3rd auxiliary channel wire or two-step door opening wire
(programmable).
A) 3rd auxiliary channel – “-“ 300mA.
B) Two-step door opening – “-“ 300mA.
15. Yellow and black wire – wire for remote boot opening.
(- 300mA, 1 sec)
26
To Next Page
Loading...