 The name of the next road on your route.
 Lane guidance at some junctions.
4.
Route symbols. Symbols are used on your route to show your starting location, your stops, and
your destination.
5.
Main Menu button. Select the button to show the Main Menu.
6.
Speed panel. This panel shows the following information:
 The speed limit at your location.
 Your current speed. If you drive more than 5 km/h or 3 mph over the speed limit the speed
panel turns red. If yo
u drive less than 5 km/h or 3 mph over the speed limit the speed panel
turns orange.
 The name of the street you are driving on.
 The speed camera or risk zone report button.
7.
Current location. This symbol shows your current location. Select the symbol or the speed panel
to open the qu
ick menu.
8.
Route bar. The route bar is shown when you have planned a route.
The route bar
The route bar is shown when you have planned a route. It has an arrival information panel at
the
top, and a bar with symbols underneath.
The arrival information panel shows the following information:
 The estimated time that you will arrive at your destination.
 The length of time to drive to the destination from your current
location.
 A parking button is shown near the destination flag when parking is
available near yo
ur destination.
If you have stops on your route, select this panel to change between
information about the next stop and your final destination.
You can choose the information you see on the arrival information panel.
Traffic status - if your TomTom GO CLASSIC isn't receiving any traffic
information, a symbol showing traffic with a cross appears underneath
the
arrival information panel.
The bar uses symbols to show the following information:
 A faster route, if there is traffic on your route.
 The stops on your route.
Tip: To quickly remove a stop, select it in the route bar and use the
Tip: If your destination is in a different time zone, you see a plus (+)
or a minus (-) sign and the time difference in hours and half hours in
the arrival information panel. The estimated time of arrival is the
local time at your destination.
Tip: You can also choose to see a wider route bar showing additional route information (not
available on all devices or apps).
Note: The distance ahead shown by the route bar depends on the overall length of your route.
Note: If your TomTom GO cannot find your location the symbol appears grey.
Note: You cannot change the current location symbol.
Note: Select the instruction panel to see a list of turn-by-turn text instructions for your
planned route.
To Next Page
Need help?
General
Weight and Dimensions
