Navigating using a saved route
To navigate using a previously saved route, do the following:
1.
In the Main Menu, select My Routes.
2.
Select a route from your list.
The route is shown on the map view.
3.
To navigate to the start of the saved route, select Drive/Ride depending on which device you
are using.
The starting point of the saved route is converted to your first stop and then the route is
planned. Guidance to your destination begins from your current location. As soon as you start
driving, the guidance view is shown automatically.
Navigating to a stop on a saved route
You can navigate from your current location to a stop on your saved route instead of to the start of
the saved route. The stop is changed to the start of your route. Your new starting point might be
one closer to your current location, or you might just want to make your route shorter.
Note: The route from the original starting point up to the new starting point is removed from the
route.
Tip: There are two other ways to navigate using a saved route:
Select the starting point of the route. When the pop-up menu opens, select Change to a Stop.
Alternatively, select Drive to Route or Ride to Route in the Current Route menu.
Tip: You can also save a route using the Add to My Routes button in the Current Route menu.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
