TomTom GO CLASSIC - Navigation Buttons

27
 Report a new speed camera
 Change a speed limit
 Avoid a blocked road
 See your current location or your latitude/longitude if not on a named road.
Navigation buttons
On the map view or guidance view, select the Main Menu button to open the Main Menu.
The following navigation buttons are available in the Main Menu screen, in addition to other buttons
and symbols:
Search / Drive To
Select
this button to search for an address, a place or a Point of Interest,
then
plan a route to that location.
Address
In
the Drive To menu, select this button to search for an address then
plan
a route to that location.
Point of Interest
In
the Drive To menu, select this button to search for a point of interest,
then
plan a route to that location.
Latitude Longitude
In
the Drive To menu, select this button to search for a latitude-longitude
coordinate,
then plan a route to that location.
Drive Home
Select
this button to drive to your home location. If this button is not
included
in your Main Menu, go to My Places to set up your home location.
Note
: Search is used for Quick search. Drive To is used for Step by step
search
.
Note: Not all features are supported on all devices.