Using destination prediction
If your device prompts "Going to X?", where X is a destination, you have 12 seconds to respond yes or
no.
To respond yes, select Yes. Your device plans a route to your destination.
To respond no, select No or tap the screen to return to the map.
Switching destination prediction on or off
You can turn destination prediction on or off at any time. See Route planning for information on
how to switch this feature on or off.
Planning a route to an address
STEP BY STEP SEARCH ONLY
Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route to an address, do the following:
1.
Select the Main Menu button to open the Main Menu.
2.
Select Drive To.
3.
Select Address.
You can change the country or state setting by selecting the flag before you select a city.
4.
Enter the town or city name, or the postcode.
Towns wi
th similar names are shown in the list while you type.
When the correct city or town appears in the list, select the name.
5.
Enter the street name.
Streets with similar names are shown in the list while you type.
Tip: If you don't respond yes or no, your TomTom GO assumes a yes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
